Skip to Content
Jarhead Diagnostics
Jarhead Diagnostics
Home Page
Shop
About
Contact
Blog
Financing
Demo Videos
Lead Time
Return Policy
Login Account
0
0
Jarhead Diagnostics
Jarhead Diagnostics
Home Page
Shop
About
Contact
Blog
Financing
Demo Videos
Lead Time
Return Policy
Login Account
0
0
Home Page
Shop
About
Contact
Blog
Financing
Demo Videos
Lead Time
Return Policy
Login Account
Shop 2-Pin AMP connector breakout lead
TA012-breakout-lead.jpg Image 1 of
TA012-breakout-lead.jpg
TA012-breakout-lead.jpg

2-Pin AMP connector breakout lead

$37.00
sold out

The TA012 AMP breakout lead enables you to take voltage readings from the numerous 2-pin sensors and actuators in the engine compartment. Simply connect the breakout lead into the existing cable loom, and then take the output signal from the two 4 mm banana plugs into the automotive oscilloscope using one of the TA125 to TA128 premium test leads. The breakout cable gives access to the individual wires to allow probing with current clamps. For example, this allows both injector current and injector voltage to be captured.

Note: the test lead is required to convert the 4 mm banana plug connection on the TA012 to a BNC connector suitable for plugging into the PicoScope.

Get notified by email when this product is in stock.
Add To Cart

The TA012 AMP breakout lead enables you to take voltage readings from the numerous 2-pin sensors and actuators in the engine compartment. Simply connect the breakout lead into the existing cable loom, and then take the output signal from the two 4 mm banana plugs into the automotive oscilloscope using one of the TA125 to TA128 premium test leads. The breakout cable gives access to the individual wires to allow probing with current clamps. For example, this allows both injector current and injector voltage to be captured.

Note: the test lead is required to convert the 4 mm banana plug connection on the TA012 to a BNC connector suitable for plugging into the PicoScope.

The TA012 AMP breakout lead enables you to take voltage readings from the numerous 2-pin sensors and actuators in the engine compartment. Simply connect the breakout lead into the existing cable loom, and then take the output signal from the two 4 mm banana plugs into the automotive oscilloscope using one of the TA125 to TA128 premium test leads. The breakout cable gives access to the individual wires to allow probing with current clamps. For example, this allows both injector current and injector voltage to be captured.

Note: the test lead is required to convert the 4 mm banana plug connection on the TA012 to a BNC connector suitable for plugging into the PicoScope.

You Might Also Like

6-way universal breakout lead, medium (2.3 mm)
6-way universal breakout lead, medium (2.3 mm)
$34.00
sold out
Fuse extension leads kit
Fuse extension leads kit
$123.00
sold out
6-way universal breakout lead, micro (0.6 mm)
6-way universal breakout lead, micro (0.6 mm)
$34.00
sold out
Maxi fuse extension lead
Maxi fuse extension lead
$34.00
sold out
Connector breakout lead kit B
Connector breakout lead kit B
$183.00
sold out

Made with Squarespace